Print Engine: Paper Exit
Paper Exit Assembly
(PL10.1.2)
J29
1
1. Image Processor Shield Assembly
2. Paper Exit Assembly
1.
Remove the Paper Exit Cover (page 8-4) or Stacker (page 8-132) if installed.
2.
Remove the Right Cover (page 8-7
3.
Remove the Left Cover (page 8-9).
4.
Remove the Image Processor Shield Assembly (page 8-86).
5.
Unplug J29 (the Exit Sensor Harness Assembly) from P29 on the HVPS/Engine
Logic Board.
FRU Disassembly
2
3. Exit Motor PWBA
3
J103
s4500-128
8-61