Replacement
1.
Remove screws retaining valve guide to panel,
as shown in figure 2D-98.
2.
Remove valve assembly by depressing pins at
top and bottom o f valve.
3.
Reverse the above steps for installation.
REAR VIEW M IR R O R S
Inside Rear View Mirror
Replacement
The inside m irror m ay be removed by removing
screw retaining mirror to its glass-mounted bracket, and
lifting m irror off bracket.
Outside Rear View Mirrors
Outside rear view m irro r installations are shown in
figure 2D-100. Occasional tightening o f m ounting and
a ssem bly
bolts
a n d
screws
occurence o f failure due to door slam m ing or road shock.
will
sharply
decrease