Chevrolet 1977 light duty truck Service Manual page 132

Fig. 2D-10--Rear View M irrors
bu m p e r is gained by reaching into c om partm ent opening
with door partially open.
A d ju stm ent
E ngagem ent of lock in striker may be adjusted by
loosening striker retaining screws and moving the striker
to desired position.
O U T S ID E REAR V IE W M IR R O R S
Rear view mirror installations are shown in figure
2D-9, 2D-10 and 2D-11.
mounting and assembly bolts and screws will sharply
decrease occurrence of failure due to door slamming or
road shock.
Occasional tightening o f
N OTE: C am p er mirror installation is similar to the
below eyeline mirror installation.
IN S ID E REAR VIEW M IR R O R - FIG URE 2D-
11
Replacement
1. Remove screw retaining m irror to its glass-
mounted bracket and remove mirror.
2. Install m irror into its mounting bracket. Torque
screw to specifications.
COWL V E N T VALVE - FIGURE 2D-12
Two styles are shown in Figure 2D-12. Removing
the attaching screws allows removal of the valve from
the side panels.