Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the right to update the existing document or to create a new document to correct any errors or omissions at any time.
Should your PixelStorm™ COB Mini fuse require replace- ment, please contact Blizzard Lighting for instructions, or to return your unit for service. Connecting A Bunch of PixelStorm™ COB Mini Fixtures You will need a serial data link to run light shows using a DMX-512 controller or to run shows on two or more fixtures set to sync in mas- ter/slave operating mode.
® UNDER NO CIRCUMSTANCES IS BLIZZARD LIGHTING RESPON- SIBLE FOR ANY DAMAGE FROM SUCH OPERATION. • Fixtures bearing the above logo MUST only use cable and connectors which separate chassis/case ground from cable shielding. Cabling with the shield connected to the con- nector’s case/chassis may cause malfunction and damage to the wiCICLE...
Need help?
Do you have a question about the PixelStorm COB Mini and is the answer not in the manual?
Questions and answers