Replacing The Mid-Tower Case Cover - Gateway E-420 Maintaining & Troubleshooting

10 Maintaining and Troubleshooting Your E-4200 System

Replacing the mid-tower case cover

You need a grounding wrist strap and a Phillips screwdriver to close the
case.
To replace the mid-tower case cover
If you installed additional external drives, then you must replace the
1.
bezel. Hook the tabs at the bottom of the front bezel into the slots in
the chassis. Then push the bezel into the chassis until the spring clips
snap the bezel in place.
Place the left side panel onto the chassis and slide the panel toward the
2.
front of the chassis. Replace the two screws that attach the panel to the
chassis.
Place the right side panel onto the chassis, making sure the panel fits
3.
into the rails on the chassis. Slide the panel toward the front of the
chassis until the tabs on the panel fit under the rim of the chassis.
Replace the two thumbscrews that attach the panel to the chassis.
4.