Replacing The Cover; Replacing The Desktop Case Cover - Gateway E-420 Maintaining & Troubleshooting

Push in the tabs on each side of the front bezel and pull the bezel off
5.
the chassis.
1. Press in tabs
on both sides
of chassis
2. Pull off
bezel

Replacing the cover

Replace the cover as soon as you finish installing or removing components
so that dust and dirt (which could damage the computer) do not collect
inside the computer.

Replacing the desktop case cover

You need a grounding wrist strap and a Phillips screwdriver to close the
case.
To replace the desktop case cover
If you removed the case bezel, replace the bezel by inserting it at the
1.
bottom of the system frame and snapping the top tabs back in place.
Slide the top panel cover back on to the case frame.
2.
Secure the top panel cover with the thumbscrews you removed.
3.
Case Access 9