Furuno FELCOM 250 Operator's Manual page 118

6. WEB FUNCTIONS
Item
Add connection button Create a connection list. The creation screen appears. Ser-
Settings button
P mark
Service
Application
Status
Operation
Edit button
Creation screen/edit screen
6-14
vice and application combinations that are already registered
cannot be created here.
Set WAN connection. (Not available if PS is connected.) The
WAN setting screen appears.
The P is displayed from 1st PS connection.
Display services.
Activate for 2nd and after PS connections. Display usable ap-
plications.
Show connection status.
Connected: Opening connection, Not connected: Not con-
nected.
• Disconnect button (while connected): Disconnect connec-
tion.
• Connect button: (while disconnected): Establish connec-
tion.
Note 1: If P marked service is disconnected, other services
disconnect.
Note 2: If you have a password set for data communications
limit and you press one of the buttons above while creating a
connection list, you are asked to enter your password.
Edit the connection list. (Not available when PS connection is
active.) The WAN edit screen appears
Creation screen
Edit screen
Description