Wan Settings - Furuno FELCOM 250 Operator's Manual

Item
Enabled/Disabled
Name
IP address
VRRP ID (1-255)
VRRP Tx interval
Priority (1 - 254)
Preempt mode
Status
Apply button
Cancel
6.1.5

WAN settings

The Network Administrator is responsible for the entry of WAN-related settings.
Click [Settings] in the menu bar, then [Network settings] and [WAN] in the sub-menu.
The following screen appears.
Delete button
Enabled: VRRP valid, Disabled: VRRP invalid (default). The set-
tings mentioned below cannot be changed when [Disabled] is
active.
Enter name of virtual router. (alphanumeric input, a maximum of
50 characters)
Enter the IP address (IPv4) of the virtual router.
Enter VRRP ID (numeric input, 1 - 255).
Enter VRRP transmitting interval (numeric input, 1 - 99).
Enter priority (numeric input, 1 - 254).
Enable or disable the preempt mode. [ ] indicates enabled. De-
fault: enabled
Show status (Master, Backup, Error enabled/disabled).
Click to apply settings.
Restore previous settings.
*
*: Connection list
Item
Delete the item having a checkmark [ ].
• [Standard] data, at the top of the connection list, cannot be
deleted.
• An item cannot be deleted if it is connected ([Status]=[Con-
nected]
6. WEB FUNCTIONS
Description
Description
6-13