How To Connect/Disconnect To/From The Internet - Furuno FELCOM 250 Operator's Manual

2. HANDSET OPERATIONS
2.4.1

How to connect/disconnect to/from the Internet

How to connect to the Internet
If you are already connected to the Internet via the Web software (Idle screen displays
"D: Connected"), the following procedure is NOT necessary.
Do the following to connect to the Internet:
1. At the idle screen, press the
2. Press 5 to select [Std. IP].
3. Press
"Connect..." appears. When connected, the message "Completed." is displayed.
Note 1: If connection cannot be established, the message "Failed." appears.
Note 2: If internet password is set (refer to section 6.1.5), it is required to enter a
password. Go to step 4.
4. Press the Enter key.
5. Enter the Internet password and press the Enter key.
6. Press
7. Press the
ed".
2-26
to select [Yes], and press the Enter key. While connecting, the message
to select [OK], and press the Enter key.
key to close the menu. The idle screen now displays "D: Connect-
key to open the [Web top] menu.