Furuno FELCOM 250 Operator's Manual page 124

6. WEB FUNCTIONS
Direction
DST. address
From address
Protocol
Add button
Save button
Cancel button
Change Priority screen
Apply button
Cancel button
VPN Pass-through
Click [Settings] in the menu bar, then [Network settings], [Security] and [VPN pass-
through] in the sub-menu, to open the VPN Pass-through screen.
6-20
Item
Select direction (WAN->LAN, LAN->WAN).
Enter/edit recipient address (IPv4 address).
Enter/edit sender address (IPv4 address).
• Select protocol (ALL, ICMP, Any, TCP/UDP).
• If any [Any] is selected, enter protocol number (1
- 255).
• If [TCP/UDP] is selected: Select TCP/UDP, TCP,
UDP from the listbox, enter the port number
(range 0 - 65535).
Register entered information. Return to the IP filter
screen.
Save entered information. Return to the IP filter
screen.
Return to the IP filter screen.
Item
Raise priority up the list.
Lower priority down the list.
Apply setting and return to IP filter screen.
Return to IP filter screen.
Description
Description