Furuno FELCOM 250 Operator's Manual page 74

3. SETTINGS FOR HANDSET
2. Press 3 to select [Clock] to show the [NTP server] screen.
3. Press the Enter key to show the IP address input screen.
4. Enter the IP address (maximum 15 characters) of the communication unit then
press the Enter key.
5. Press the
6. Press the
How to set call and message notifications
Set the notifications for missed call and received messages at the [Notify] screen. No-
tifications can be set to appear as icons (
as a window message, or as icons with no window message.
1. In the [Settings] menu, press 1 to select [Basic] to show the [Basic] menu.
2. Press 4 to select [Notify] to show the [Notify] screen.
3. For missed call notification setting, press 1 to open the [Missed call] screen. For
received message notification setting, press 2 to open the [New SMS] screen.
4. To set notifications as both icons and a window message, set to [ON]. If you don't
need to display the window message and icon, set to [OFF].
5. Press the Enter key.
If you select [ON] at the above step, the following [New SMS] window appears. Go
to step 6.
3-12
key to apply the setting.
key to close the menu.
/ ) on the upper part of the screen and