How To Change The Administrator Password; Device List; How To Detect Devices Automatically - Furuno FELCOM 250 Operator's Manual

• New Password isn't corresponding: The [New password] and [Confirm new
password] fields are not the same.
7. Click the [OK] button.
6.1.9

How to change the administrator password

Do the following to change the Administrator password (needed when login as Admin-
istrator.). Make sure to write down and not forget the password. If the password is lost,
contact the dealer or retail supplier. If this occurs, FELCOM 250/500 must be reset to
factory settings (refer to section 7.7.2).
1. Click [Settings] in the menu bar.
2. Click [Change password]. The following Administrator password setting screen
appears.
3. Enter the new password in the [New password] field (4 - 8 characters). The char-
acters are displayed as black circles.
4. Enter the new password again in the [Confirm new password] field.
5. Click the [Apply] button. The message "Setting completed" appears.
Note: The following error messages can occur:
• New Password isn't corresponding: The [New password] and [Confirm new
password] fields are not the same.
6. Click the [OK] button.
6.2

Device List

All devices connected to the same network can be displayed. All devices auto detect-
ed on the handset also be changed with the Web software.
6.2.1

How to detect devices automatically

1. Click [Device] in the menu bar.
6. WEB FUNCTIONS
6-23