Web Software Initialize - Furuno FELCOM 250 Operator's Manual

7. MAINTENANCE AND TROUBLESHOOTING
1. At the idle screen press the Enter key to open the Main menu.
2. Press
3. Press 5 to select [Initialize]. The password input screen
appears.
4. Press the Enter key.
5. Enter the operation password and press the Enter key.
6. Press
Initialize screen displays.
7. Press
key.
8. Press
reset is finished, the message "Initialized." displays.
7.7.2

Web software initialize

There are two methods to initialize (reset) the Web software: [Initialize except connec-
tion settings] and [Initialize all]. The results differ based on which method used:
Main: Satellite Search Option
SMS: all SMS box (SIM)
SMS: SMS Settings
Contacts: All Contacts
SIM: All SIM Data
Settings(Basic): GPS, Serial Port
Settings(Basic): Incoming Indicator
Settings(Basic): Analog Port
Settinsg(Basic): Satellite
Settings(Basic): OTA
Settings(PBX setting): Incoming Routing, Call
Limit, Group
Settings(PBX setting): Extension
Settings(Network setting): LAN IP Address,
Subnet Mask
Settings(Network settings): LAN/DHCP
Settings(Network settings): LAN/Routing, RIP,
VRRP
Settings(Network settings): WAN
Settings(Network settings): Security
7-12
to select [Settings], and press the Enter key.
to select [OK], and press the Enter key. The
or to select the method, and press the Enter
to select [OK], and press the Enter key. When
Item
Initialize Except
Connect Settings
Yes
No
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
No
Yes
Yes
Yes
Initialize ALL
Yes
No
Yes
No
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes