Furuno FELCOM 250 Operator's Manual page 109

4. Click [Add group]. The following New Registry screen appears. [Number] field dis-
plays the lowest 9000 number not in use. If using this number, go to step 6. If en-
tering a new number, go to step 5.
Required input
Required input
Required input
(more than 1)
5. In the [Number] field, enter the group number (1000 - 9999).
6. Enter a name for the group in the [Group name] field (max. 50 characters).
7. Add members to the group as follows:
1) Click desired number in the available numbers list.
2) Click the [<<Add] button to add the selected number to the member list.
Note: If you added a wrong number, select the number in the member list and
click [Delete ＞＞ ] to erase the number from list.
3) Repeat steps 1 and 2 to add more members to group.
8. Click the [Add] button. The message "Completed." appears.
Note: The following messages are displayed when you try to register a number
that has already been registered:
• "This number has already been registered": The number already exists.
9. Click the [OK] button. The Group screen is displayed with the new group.
How to edit the group number
1) Display the group screen.
2) Select the group number to edit, and click the [Edit] button.
3) Edit the group number, name or members.
4) Click the [Save] button.
5) Click the [OK] button.
Member field
6. WEB FUNCTIONS
Available number field
6-5