Furuno FELCOM 250 Operator's Manual page 101

3. Click the [Connect] button of the service to use. When connecting, the message
"Now connecting..." displays. When connected, the message "***connection suc-
cess." appears.
Note 1: If connection fails, the message "***connection failure." displays.
Note 2: If the internet password is enabled in section 6.1.5, it is required to enter
password. Proceed to step 4.
4. Enter the Internet password and click the [OK] button.
Example: Internet Explorer (Windows Vista)
5. Click the [OK] button to close the message.
6. To use multiple data services, repeat steps 3 - 5.
Note: It is not possible to use the same application that is already connected. Dis-
connect the service, and reconnect.
When connected to the internet, the connection list is displayed as shown:
P Mark
Example: Standard IP packet, 32 kbps streaming IP packet communications
• The first service has a P mark, and "---" appears in the [Application] field. In the
above connection list, Standard IP Packet Data Connection Service is connect-
ed first.
• In the [Status] field, "Not connected" changes to "Connected" (displays in
green).
• The [Operation] field "Connect" button changes to "Disconnect".
7. Open the desired application software and begin data communication.
Applications are not limited to only those marked with the P mark (applications
preset at section 6.1.5.) You can use any software that appears after the 2nd ap-
plication in the list. For example, in the connection list above, Windows Media
Player 32 kbps streaming IP packet communication is shown. All other applica-
tions can be used except Windows Media Player.
How to disconnect from the internet
Do the following to disconnect from the internet:
1. Click [Main] in the menu bar.
2. Click [Data connection]. The [Data connection] screen is displayed.
3. Click [Disconnect] for the services to disconnect. When disconnecting, the mes-
sage "Now disconnecting..." is displayed. When disconnected, the message
"***disconnection success." is displayed. (***: Service and application)
Note 1: If you disconnect a service marked with a P mark, all other connected ser-
vices will disconnect.
5. WEB SOFTWARE
Connected
Connected
5-17