Reboot; Warm Boot - Honeywell MX7 Reference Manual

32 Key Numeric-Alpha Keypad

Reboot

When the Windows CE desktop is displayed or an application begins, the power up (or reboot) sequence is complete.

Warm Boot

Start > Run
In warm boot, the MX7 reloads the operating system and CAB files from the internal SD card and the preserved registry is also
reloaded. Anything not saved or preserved to the registry is lost.
Hold down the Power key for 15 seconds until the display blanks, then release the key.
Or, using the input panel,
Tap Start > Run and type WARMBOOT.EXE or WARMBOOT. This command
This process takes less than 15 seconds. Temporary data not saved is lost.
Note: There may be slight delays while the wireless client connects to the network, re-authorization for
voice-enabled applications completes, Wavelink Avalanche management of the MX7 startup
completes, or Bluetooth relationships establish or re-establish.
1
The text typed in the text box can be upper or lower case or a combination of upper and lower case letters.
1-8
1. System Status LED
2. Alpha Status LED
3. Diamond Keys
4. Scan Button
5. Enter Key
6. Alph Key
7. Orange Key (Sticky Key)
8. Blue Key (Sticky Key)
9. On Off Button
10. Scan Status LED
1
is not case-sensitive. Tap the OK button.