Honeywell MX7 Reference Manual page 185

c3 min length = 24, max length = 24, strip leading 2, strip trailing 8, Code ID enabled, Barcode Data = "01"
l
c4 min length = 20, max length = 20, strip leading 0, strip trailing 4, Code ID enabled, Barcode Data = "00"
l
Add the AIM custom symbologies. Refer to the previous section Bar Code – Symbology Settings for instruction.
Click the Barcode Data button.
Click the Add button.
Add the data for the match codes.
Refer to the previous section
Scan a bar code and examine the result.
Barcode Data Match List for instruction.
4-147