Cold Boot; Startup Help - Honeywell MX7 Reference Manual

Cold Boot

Start > Run
The Cold Boot function reboots the device, erases all registry data, and user-specified settings. The factory default settings are
restored when the MX7 powers on again.
Tap Start > Run and type COLDBOOT.EXE or COLDBOOT. This command
Note: Because of the extreme nature of cold boot, Honeywell recommends using this command only as an
emergency (or when instructed to do so as part of a specific MX7 procedure).

Startup Help

Can't change the date/time or
adjust the volume.
Touchscreen is not accepting
stylus taps or needs
recalibration.
MX7 seems to lockup as soon
as it is warm booted.
New MX7 main batteries don't
last more than a few hours.
Keep losing ActiveSync
connection between my host
computer and the MX7.
1
The text typed in the text box can be upper or lower case or a combination of upper and lower case letters.
AppLock is installed and may be running in User Mode on the MX7. AppLock user mode
restricts access to the control panels.
Press <Ctrl>+<Esc> to force the Start Menu to appear. Use the tab, backtab and cursor
keys to move the cursor from element to element.
There may be slight delays while the wireless client connects to the network, authorization
for voice-enabled applications complete, and Bluetooth relationships establish or re-
establish. When the desktop appears or an application begins, the MX7 is ready for use.
New batteries must be fully charged prior to first use. Li-Ion batteries (like all batteries)
gradually lose their capacity over time (in a linear fashion) and never just stop working. This
is important to remember – the MX7 is always 'on' even when in the Suspend state and
draws a small amount of battery power at all times.
When the MX7 enters Suspend Mode, all connections are closed to save battery power.
When the MX7 wakes up, if ActiveSync connection does not automatically re-establish,
disconnect the cable, wait 1-2 seconds and reconnect the cable.
1
is not case-sensitive . Tap the OK button.
1-9