Honeywell MX7 Reference Manual page 274

To use Sign-On credentials:
Do not enter a User and Password as the user will be prompted for the Username and Password when connecting to the
l
network.
To use Stored Credentials:
Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
l
Enter the password.
l
To use Automatic PAC Provisioning:
No additional entries are required.
l
To use manual PAC Provisioning:
Enter the PAC Filename and PAC Password.
l
The PAC file must be copied to the directory specified in the Certs Path global variable. The PAC file must not be read
l
only.
Tap OK then click the Commit button.
Ensure the correct Active Profile is selected on the
after the radio connects to the network.
Note: When using Automatic PAC Provisioning, once authenticated, there is a file stored in the \System
directory with the PAC credentials. If the username is changed, that file must be deleted. The
filename is autoP.00.pac.
7-36
Main tab and warmboot. The SCU Main tab shows the device is associated