System Reset - Roberts User Manual

System reset

If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press the On / Standby button to switch on the radio.
2. Press the Menu button.
3. Press and release the Tuning Up or Down buttons until 'Factory
Reset' appears on the display. Press and release the Select button.
4. Press and release the Tuning Up or Down buttons to highlight 'Yes'.
Press and release the Select button to proceed.
If you do not wish to carry out a system reset, highlight 'No' and then
press the Select button. The display will revert to the previous display.
5. A full reset will be performed. The station list and presets will be erased.
Alarms will be cancelled and snooze and sleep timer settings will be
set to their default values. The display will show 'Welcome to Digital
Radio'. After a short time the current date and time will appear on the
display.
6. See 'Operating your radio' on page 9 for further details.
In case of malfunction due to electrostatic discharge, reset the product
as above to resume normal operation. If you are not able to perform the
reset operation as above, removal and reconnection of the power supply
may be required.
If a problem persists our technical staff would be pleased to offer any
assistance on operating the radio. Our technical helpline number is
020 8758 0338.
47
2
3,4
3,4
3-4