Manual Tuning - Dab - Roberts User Manual

Manual tuning - DAB

Manual tuning allows you to tune your radio to a particular DAB frequency
in Band III. Any new stations found will be added to the station list. This
function can also be used to assist the positioning of the aerial or the radio
to optimise reception for a specifi c channel or frequency. Note that UK
DAB stations are located in the range of channels 11B to 12D.
1. Press and release the Menu button.
2. Press the Tuning Up or Down buttons until the display shows 'Manual
tune'. Press and release the Select button to enter the manual tuning
mode.
3. Press the Tuning Up or Down buttons to select the desired DAB
channel.
4. Press and release the Select button to tune to the chosen frequency.
The open block is the signal strength needed for good DAB reception.
The signal blocks will go up and down showing the changing signal
strength as you adjust the aerial or the radio position. Any new radio
stations found on the tuned DAB multiplex will be added to the list
stored in the radio.
5. Press and release the Select button again to return to the normal DAB
tuning mode.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1
2,3
2,3
2-5
14