Recalling A Preset Station - Roberts User Manual

Recalling a preset station

1. Press the On / Standby button to switch on the radio.
2. Press the Mode button to select the desired waveband DAB or FM.
3. Press and release the Preset button. The display will show, for example,
'Empty 1' if no station has been stored to that preset. If a preset has
been stored, then the display will show either the station name (for
DAB stations) or the frequency (for FM stations).
4. Press the Tuning Up or Down buttons to select the desired preset
station.
5. Press and release the Select button. Your radio will tune to the chosen
preset station stored in the preset memory.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
2
3
4
4
5
24