Setting The Clock Manually - Roberts User Manual

Setting the clock manually

Normally your radio will set its clock automatically using the DAB radio
signal. If no DAB signal is available and you need to set the time manually,
please follow the procedure shown below.
1. Press the On / Standby button to switch on the radio.
2. To set the clock time, press the Menu button to enter the setup menu.
3. Press the Tuning Up or Down buttons until 'Clock' appears on the
display. Press and release the Select button.
4. Press the Tuning Up or Down buttons until 'Set Time/Date' appears
on the display.
5. Press and release the Select button. The hour digits will then fl ash
on the display.
6. Press the Tuning Up or Down buttons to set the desired hour.
7. Press and release the Select button to enter the hour setting. The
minute digits will then fl ash on the display.
8. Press the Tuning Up or Down buttons to set the desired minute.
37
2
3-8
3-8
3-7