System Reset - Roberts Expression User Manual

System reset

If your radio fails to operate correctly, or some digits on the display are
missing or incomplete, it may be possible to restore normal operation by
carrying out a System Reset operation on your radio. This will restore the
radio's settings to their factory defaults. No presets will be stored, and the
list of DAB radio stations will be empty.
If you have moved to a different part of the country and you wish to erase
local DAB radio stations that are no longer available from the stored list,
then you may carry out this procedure. Your radio will automatically re-scan
for the DAB stations available at your current location when it restarts.
1. Ensure your radio is in DAB or FM mode. Press and hold down the
Info button for 2 seconds.
2. Rotate the Tuning control until the display shows 'Factory Reset', then
press and release the Tuning control.
3. If you wish to perform the reset operation, press and release the Tuning
control one more time. A full reset of your radio will be performed. All
presets and station lists will be erased.
4. After a system reset a scan of the DAB band will be performed.
In the event of a malfunction due to electrostatic discharge, mains power
supply transients or short interruptions, reset the product as above to
resume normal operation. If you are not able to perform the reset operation
as above, removal and reconnection of the power supply and batteries
may be required.
23
1
2-3