Display Backlight Dimmer; Software Version - Roberts User Manual

Display backlight dimmer

The brightness of the display can be adjusted for when the radio is in
Standby and or whilst playing. If you use the unit in the bedroom, you may
prefer a lower standby brightness level than the standard setting. There
are 3 brightness levels and an almost off 'night-time' setting.
1. To change the dimmer brightness using the remote control press and
release the Dimmer button to step through the brightness levels.
2. To change the dimmer brightness using the radio press and hold the
Dimmer button to step through the brightness levels.

Software version

The software display cannot be altered and is just for your reference.
1. Press the On / Standby button to switch on the radio.
2. Press the Menu button to enter the setup menu.
3. Press the Tuning Up or Down buttons until 'SW version' appears on
the display.
4. Press and release the Select button to view software information.
5. Press the Menu button to exit the menu.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1
2
2,5
3
3
4
46