System Reset - Roberts solarDAB 2 Manual

System reset

If your radio fails to operate correctly, or some digits on the display are
missing or incomplete, it may be possible to restore normal operation by
carrying our a System Reset operation on your radio. This will restore the
radio's settings to their factory defaults. No presets will be stored, and the
list of DAB radio stations will be empty.
If you have moved to a different part of the country and you wish to erase
local DAB radio stations that are no longer available from the stored list,
then you may carry out this procedure. Your radio will automatically re-scan
for the DAB stations available at your current location when it restarts.
1. Press the On/Off button to switch on your radio.
2. Press and hold the Info button until the Advanced DAB or FM menu
shows on the display and then release the button.
3. Rotate the Tuning control until the display shows 'Factory Reset',
then press and release the Tuning control. 'Press SELECT to confi rm
reset' will show on the display.
4. If you wish to perform the reset operation, press and release the Tuning
control one more time. A full reset of your radio will be performed. All
presets and station lists will be erased.
5. After a system reset a scan of the DAB band will be performed.
In case of malfunction due to electrostatic discharge, reset the product
(temporary disconnection of the power adaptor or removal of batteries
may be required) to resume normal operation.
Factory Reset
2
Press SELECT to
confirm reset...
Welcome to DAB
3,4
DAB
22