System Reset - Roberts Revival mini Manual

System reset

If your radio fails to operate correctly, or some digits on the display are
missing or incomplete, it may be possible to restore normal operation by
carrying out a System Reset operation on your radio. This will restore the
radio's settings to their factory defaults. No presets will be stored, and the
list of DAB radio stations will be empty. If you have moved to a different part
of the country and you wish to erase local DAB radio stations that are no
longer available from the stored list, then you may carry out this procedure.
Your radio will automatically re-scan for the DAB stations available at your
current location when it restarts.
1. Press and release the On/Off control to switch on your radio and ensure
your radio is in the DAB or FM mode.
2. Press and hold down the Info button for 2 seconds.
3. Rotate the Tuning control until the display shows 'Factory Reset', then
press and release the Tuning control.
4. If you wish to perform the reset operation, press and release the Tuning
control one more time. A full reset of your radio will be performed. All
presets and station lists will be erased.
5. After a system reset a scan of the DAB band will be performed.
If a problem persists please refer to the guarantee section at the back of
this book which explains how to obtain support for your radio.
Electro-magnetic compatibility advice
In the event of a malfunction due to electrostatic discharge, mains power
supply transients or short interruptions, reset the product as above to resume
normal operation. If you are not able to perform the reset operation as above,
removal and reconnection of the power supply and batteries may be required.
If the product is used in an environment with any ESD Immunity / Radiated
Immunity / Conducted Immunity disturbance, the product may malfunction.
It will automatically recover to normal when the ESD Immunity / Radiated
Immunity / Conducted Immunity disturbance is stopped.
23
1
2
3,4
Product markings
DC Voltage
Power input 7.5V / 0.8A
Recycling
This product bears the selective sorting symbol for
Waste Electrical and Electronic Equipment (WEEE).
This means that this product must be handled
pursuant to European directive 2012/19/EU in order
to be recycled or dismantled to minimize its impact on
the environment.
The user has the choice to give the product to a
competent recycling organization or to the retailer
when buying a new electrical or electronic equipment.