System Reset - Roberts Gemini RD-45 User Manual

System reset

If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press and release the On/Off button to switch on your radio.
2. Press and release the Menu button.
3. Press and release the Tuning Up or Down buttons until the display
shows 'Factory Reset'.
4. Press and release the Select button. The display will show 'Press
SELECT to confi rm reset'.
5. Press and release the Select button again. A full reset will be performed.
The station list and presets will be erased.
6. See 'Operating your radio' on page 6 for further details.
In the event of a malfunction due to electrostatic discharge, mains power
supply transients or short interruptions, reset the product as above to
resume normal operation. If you are not able to perform the reset operation
as above, removal and reconnection of the power supply and batteries
may be required.
or Select
Factory Reset
2
Press SELECT to
confirm reset
3
3
4,5
20