Auxiliary Input (Line In) Socket; Usb Socket For Software Upgrade - Roberts User Manual

Auxiliary Input (Line in) socket

A 3.5mm stereo Auxiliary Input socket is provided on the rear of your
radio to permit an audio signal to be fed into the unit from an external
audio device such as iPod, MP3 or CD player.
1. Connect a stereo or mono audio source (for example, iPod, MP3 or
CD player) to the Auxiliary Input socket (marked "Aux In").
2. Press and release the Mode button until 'Auxiliary input mode' is
selected on the display.
Note: The Auxiliary input mode can only be selected when a plug is
inserted into the socket.
3. Adjust the Volume control on your iPod, MP3 or CD player to ensure
an adequate signal and then adjust the volume on the radio for
comfortable listening.
4. Remove the cable from the Auxiliary input socket or press and release
the mode button to cancel the auxiliary input mode.

USB socket for software upgrade

In the event that any software update is made available for your radio,
information on how to update your radio will be made available via our
website at http://www.robertsradio.co.uk
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1
1.5A
2
48