System Reset - Roberts Rambler Manual

System reset

If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press and release the On/Off button to switch on the radio.
2. Press and hold the Info/Menu button. The main menu will show on
the display.
3. If using the DAB or FM mode, rotate the Tuning/Select control until
'SYSTEM' appears on the display. Press and release the Tuning/
Select control.
4. Rotate the Tuning/Select control until 'FACTORY' appears on the
display. Press and release the Tuning/Select control. 'RESET' will
show on the display.
5. Press and release the Tuning/Select control.
6. A full reset will be performed. The station list and presets will be erased.
The display will show 'RESTART' then 'WELCOME' and after a few
seconds a station scan search will be performed automatically. The
display will show the progress of the station search. The number on
the right of the display is the number of stations that have been found.
In the event of a malfunction due to electrostatic discharge, mains power
supply transients or short interruptions, reset the product as above to
resume normal operation. If you are not able to perform the reset operation
as above, removal and reconnection of the power supply and batteries
may be required.
33
1
2
3-5