To View The Alarm Settings; Controlling Alarm Status In Standby - Roberts User Manual

To view the alarm settings

The alarm function of your radio can be controlled with the radio playing
or in standby mode.
1. To view alarm 1, press and hold the Alarm button. 'Alarm 1 setup' will
appear on the display and the alarm 1 indicator will fl ash.
To view alarm 2, press and hold the Alarm button and then press and
release the Alarm button. 'Alarm 2 setup' will appear on the display
and the alarm 2 indicator will fl ash.
2. Press the Select button to cycle through each of the settings for the
chosen alarm.
You may use the Tuning Up and Down buttons to modify any particular
setting if desired, using the Select button to enter the modifi cation.
Controlling the alarm On/Off state in standby
When your radio is in standby the alarm status can be controlled using the
Alarm button. This avoids risk of disturbance to someone who is asleep.
1. To change the status of the alarms when in standby press and release
the Alarm button. The display will cycle through none, either and both
alarms enabled.
2. Press the Select button to confi rm alarm status. 'Alarm Saved' will
show on the display.
33
1
Sleep
2
1
Sleep
2