3Com 5500-SI Quick Reference Manual page 9

3Com Switch 5500 Family
Quick Reference Guide
default type
Use the
default type
delete
Use the
delete
delete
Use the
delete
This command is used to delete a file.
delete
Use the
delete
delete-member
Use the
delete-member
delete static-routes all
Use the
delete static-routes all
description
Use the
description
Use the
undo description
description
Use the
description
Use the
undo description
destination-ip
Use the
destination-ip
detect-group
Use the
detect-group
detect-list
Use the
detect-list
command also specifies the order in which the IP addresses in a detecting group are detected.
dhcp enable
Use the
dhcp enable
dhcp relay information enable
Use the
dhcp relay information enable
through which you can enable the DHCP relay to insert option 82 into DHCP request packets sent to a
DHCP server.
dhcp relay information strategy
Use the
dhcp relay information strategy
operations to DHCP request packets that carry option 82.
dhcp select global
Use the
dhcp select global
in global DHCP address pool mode.
dhcp select interface
Use the
dhcp select interface
interface address pool mode.
command to configure the default type when OSPF redistributes external routes.
command to delete a specified file from the storage device of the switch.
command to delete the specified file.
command to delete the specified file from the server.
command to remove a member from the cluster.
command to delete all the static routes.
command to enter a description of an Ethernet port.
command to cancel the description.
command to set a description for the current VLAN.
command to cancel the description of current VLAN.
command to configure the destination IP address of the test.
command to create a detecting group and enter detecting group view.
command to specify the IP address to be detected in the detecting group. This
command to enable DHCP.
command to enable option 82 supporting on a DHCP relay,
command to instruct a DHCP relay to perform specified
command to configure the specified interface(s) or all interfaces to operate
command to configure the specified interface(s) to operate in DHCP
9
OSPF view
User view
FTP Client view
SFTP Client view
Cluster view
System view
Ethernet Port view
VLAN view
Remote-Ping Test Group view
System view
Detecting Group view
System view
System view
System view
System view
VLAN Interface view
System view
VLAN Interface view