3Com 5500-SI Quick Reference Manual page 16

display ip routing-table ip_address1 ip_address2
Use the
display ip routing-table
the route information for the specified address range.
display ip routing-table ip-prefix
Use the command
display ip routing-table protocol
Use the
display ip routing-table protocol
protocol.
display ip routing-table radix
Use the
display ip routing-table radix
display ip routing-table statistics
Use the
display ip routing-table statistics
protocols.
display ip routing-table verbose
Use the
display ip routing-table verbose
display ip socket
Use the
display ip socket
display ip statistics
Use the
display ip statistics
display isolate port
Use the
display isolate port
display lacp system-id
Use the
display lacp system-id
MAC address.
display link-aggregation interface
Use the
display link-aggregation interface
a designated port, including aggregation group ID for the port, port priority, operation key, LACP state flag,
partner information (system ID, port number, port priority, operation key, LACP state flag, LACP packet
statistics).
display link-aggregation summary
Use the
display link-aggregation summary
groups, including actor system ID, aggregation group ID, aggregate group type, partner system ID, number
of selected ports, number of standby ports, load sharing type and master port number.
display link-aggregation verbose
Use the
display link-aggregation verbose
including aggregation ID, the type of aggregation, load-sharing type, detailed local information (member
ports, port status, port priority, LACP state flag and operation key), and detailed remote information (indexes
of remote ports, port priority, LACP state flag, operation key and system ID.)
display local-server statistics
Use the
display local-server statistics
authentication server.
display local-user
Use the
display local-user
specified one(s).
ip_address1 mask1 ip_address2 mask2 command to view
display ip routing-table ip-prefix
command to view the route information for a specified
command to view the route information in a tree structure.
command to display the verbose routing table information.
command to display the information about the sockets in the current system.
command to view the statistics information about IP packets.
command to view port isolation information.
command to view actor system ID, including system priority and system
command to view detailed link aggregation information at
command to view summary information of all aggregation
command to view detailed information of a link aggregation,
command to view the statistics of local RADIUS
command to view the relevant information of all the local users or the
command to display route information.
command to display the routing information for all
3Com Switch 5500 Family
Quick Reference Guide
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view