3Com 5500-SI Quick Reference Manual page 12

display brief interface
Use the
display brief interface
or all ports in brief, including the port type, connection state, connection rate, duplex attribute, link type and
default VLAN ID.
display channel
Use the
display channel
display clock
Use the
display clock
display.
display cluster
Use the
display cluster
that contains the current switch.
display cluster candidates
Use the
display cluster candidates
display cluster members
Use the
display cluster members
display config-agent
Use the
display config-agent unit-id
display connection
Use the
display connection
specified one(s).
display cpu
Use the display cpu command to display CPU occupancy.
display current-configuration
Use the
display current-configuration
display debugging
Use the
display debugging
display debugging
Use the
display debugging
in the whole fabric.
display debugging fabric by-module
Use the
display debugging fabric by-module
the fabric by module names.
display debugging ospf
Use the
display debugging ospf
processes.
display detect-group
Use the
display detect-group
detecting groups.
display device
Use the
display device
including physical card number, physical daughter card number, number of ports, hardware version
number, FPGA version number, version number of BOOTROM software, application version number,
address learning mode, interface card type and interface card type description.
command to display the configuration information about one specific
command to display the details about the information channel.
command to obtain information about system data and time from the terminal
command to display the state and basic configuration information of the cluster
command to display candidate devices of a cluster.
command to display the information of cluster members.
command to view statistics of the configuration agent.
command to view the relevant information of all the supplicants or the
command to display the current configurations of the switch.
command to display the enabled debugging process.
command to display the debugging switches opened on a specified switch or
command to display the debugging switches opened in
command to view the debugging states of global OSPF and all
command to display the configuration of a specified detecting group or all
command to display the module type and working status information of a card,
3Com Switch 5500 Family
Quick Reference Guide
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view