3Com 5500-SI Quick Reference Manual page 30

igmp group-limit
Use the
igmp group-limit
added to a VLAN interface.
igmp group-policy
Use the
igmp group-policy
accessing to the IP multicast groups.
igmp host-join
Use the
igmp host-join
multicast group.
igmp lastmember-queryinterval
Use the
igmp lastmember-queryinterval
sends the IGMP group query message after it receives the IGMP Leave message from the host.
igmp max-response-time
Use the
igmp max-response-time
IGMP query messages.
igmp proxy
Use the
igmp proxy
interface of another interface.
igmp robust-count
Use
igmp robust-count
IGMP Querier receives the IGMP Leave message from the host.
igmp-snooping
Use the
igmp-snooping
igmp-snooping fast-leave
Use the
igmp-snooping fast-leave
igmp-snooping group-limit
Use the
igmp-snooping group-limit
can join.
igmp-snooping group-policy
Use the
igmp-snooping group-policy
igmp-snooping host-aging-time
Use the
igmp-snooping host-aging-time
igmp-snooping max-response-time
Use the
igmp-snooping max-response-time
igmp-snooping router-aging-time
Use the
igmp-snooping router-aging-time
igmp timer other-querier-present
Use the
igmp timer other-querier-present
querier.
igmp timer query
Use the
igmp timer query
messages.
command to configure the maximum number of multicast groups that can be
command to set the filter of multicast groups on an interface to control the
command to enable a port in the VLAN interface of an ethernet Switch to join a
command to set the time interval before IGMP query router
command to configure the maximum response time contained in the
command to specify an interface of an edge-network Layer 3 switch as the IGMP proxy
command to set the number of sending the IGMP group query message after the
command to enable or disable the IGMP Snooping.
command to enable IGMP fast leave processing.
command to set the maximum number of multicast groups the port
command to configure an IGMP Snooping filter ACL.
command to set the aging time of multicast member ports.
command to configure the maximum query response time.
command to configure the aging time of the router port.
command to configure the timer of presence of the IGMP
command to configure the interval at which a router interface sends IGMP query
3Com Switch 5500 Family
Quick Reference Guide
VLAN Interface view
VLAN Interface view
VLAN Interface view
VLAN Interface view
VLAN Interface view
Interface view
VLAN Interface view
System view
VLAN view
Ethernet Port view
Ethernet Port view
System view
Ethernet Port view
System view
System view
System view
VLAN Interface view
VLAN Interface view