3Com 5500-SI Quick Reference Manual page 22

display rsa local-key-pair public
Use the
display rsa local-key-pair public
pair. If no key pair is generated, the system prompts "RSA keys not found".
display rsa peer-public-key
Use the
display rsa peer-public-key
pair. If no key name is specified, the command displays all public keys of the client
display saved-configuration
Use the
display saved-configuration
memory of an Ethernet switch.
display schedule reboot
Use the
display schedule reboot
schedule reboot terminal service.
display sftp source-ip
Use the
display sftp source-ip
source IP address is specified, 0.0.0.0 is displayed.
display snmp-agent
Use the
display snmp-agent engineid
display snmp-agent community
Use the
display snmp-agent community
display snmp-agent group
Use the
display snmp-agent group
and storage modes.
display snmp-agent mib-view
The
display snmp-agent mib-view
the Switch.
display snmp-agent statistics
Use the
display snmp-agent statistics
display snmp-agent sys-info
Use the
display snmp-agent sys-info
display snmp-agent trap-list
Use the
display snmp-agent trap-list
display snmp-agent usm-user
Use the
display snmp-agent usm-user
group username list.
display snmp-proxy unit
Using
display snmp-proxy unit
display ssh server
Use the
display ssh server
display ssh server-info
Use the
display ssh server-info
configured on the client and the servers.
command to display the public key of the server host key
command to display the client public key of the specified RSA key
command to display the current configuration file in the flash
command to check the configuration of related parameters of the switch
command to display the source IP address of the SFTP client. If no
command to view the engine ID of current device.
command to display the currently configured community names.
command to display group name, safe mode, state of various views
command is used to view the MIB view configuration information of
command to view the current state of SNMP communication.
command to view the system information of SNMP configuration.
command to display trap list information.
command to view information of all the SNMP usernames in the
command, you can view statistics information of SNMP proxy.
command to display the status or session information about the SSH server
command to display the association between the server public keys
3Com Switch 5500 Family
Quick Reference Guide
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view