3Com 5500-SI Quick Reference Manual page 14

display drv
Use the
display drv
display fan
Use the
display fan
display fib
Use the
display fib
display fib
Use the
display fib
expression and related to the specific character string.
display fib acl
Use the
display fib acl
display fib ip_address
Use the
display fib
(range).
display fib ip-prefix
Use the
display fib ip-prefix
display fib statistics
Use the
display fib statistics
display ftm
Use the
display ftm information
display ftp-server
Use the
display ftp-server
perform this command to verify the configuration after setting FTP parameters.
display ftp-server source-ip
Use the
display ftp-server source-ip
no source IP address is specified, 0.0.0.0 is displayed.
display ftp source-ip
Use the
display ftp source-ip
IP address is specified, 0.0.0.0 is displayed.
display ftp-user
Use the
display ftp-user
command to examine the configuration after setting FTP parameters.
display garp statistics
Use the
display garp statistics
display garp timer
Use the
display garp timer
display gvrp statistics
Use the
display gvrp statistics
ports.
display gvrp status
Use the
display gvrp status
command to display MNT module driver debugging information.
command to display the working state of the built-in fans.
command to view the summary of the forwarding information base.
command to view the FIB entries which are output from the buffer according to regular
command to view the FIB entries matching a specific ACL.
ip_address command to view the FIB entries matching the destination IP address
command to view the FIB entries matching the specific prefix list.
command to view the total number of FIB entries.
command to display FTM protocol information.
command to display the parameters of the current FTP Server. You can
command to display the source IP address of the FTP server. If
command to display the source IP address of the FTP client. If no source
command to display the parameters of current FTP user. You can perform this
command to display the GARP statistics.
command to display the values of the GARP timers.
command to display the GVRP statistics about all or specified Trunk
command to display the enable/disable status of global GVRP.
3Com Switch 5500 Family
Quick Reference Guide
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view