3Com 5500-SI Quick Reference Manual page 35

3Com Switch 5500 Family
Quick Reference Guide
memory auto-establish enable
Use the
memory auto-establish enable
disconnected to recover automatically when the idle memory of the Switch reaches this value.
memory { safety | limit }
Use the
memory
messenger
Use the
messenger time
parameters.
mirrored-to
Use the
mirrored-to
mirroring group
Use the
mirroring-group
mirroring-group mirroring-port
Use the
mirroring-group mirroring-port
mirroring-group monitor-port
Use the
mirroring-group monitor-port
mirroring-group reflector-port
Use the
mirroring-group reflector-port
mirroring-group remote-probe vlan
Use the
mirroring-group remote-probe vlan
mirroring group.
mirroring-port
Use the
mirroring-port
mkdir
Use the
mkdir
monitor-port
Use the
monitor-port
more
Use the
more
move
Use the
move
msdp
Use the
msdp
msdp-tracert
Use the
msdp-tracert
message loss and minimize configuration errors. After determining the path of the SA message, you can
prevent SA flooding through correct configuration.
multicast route-limit
Use the
multicast route-limit
multicast routing-enable
Use the
multicast routing-enable
command to allow the routing protocol connection that is forcibly
command to configure the limit or safety of the Switch idle memory.
command to enable or disable the messenger alert and configure the related
command to enable ACL traffic identification and perform traffic mirroring.
command to configure the port mirroring group.
command to configure the monitoring port.
command to configure a mirroring port.
command to create a directory on the remote SFTP server.
command to configure a monitor port.
command to display the contents f of the specified file formatted as text.
command to move files.
command to enable MSDP and enter MSDP view.
command to trace the path along which an SA message travels, so as to locate
command to limit the capacity of multicast routing table.
to enable IP multicast routing.
command to configure the monitored port.
command to configure a reflector port.
command to specify the remote-probe VLAN for a given
35
System view
System view
ISP Domain view
Ethernet Port view
System view
System view
System view
System view
System view
Ethernet Port view
SFTP Client view
Ethernet Port view
User view
User view
System view
Any view
System view
System view