Download Print this page

3Com 5500-SI Quick Reference Manual page 56

5500 series
Hide thumbs Also See for 5500-SI:

Advertisement

timer quiet
Use the
timer quiet
timer realtime-accounting
Use the
timer realtime-accounting
timer response-timeout
Use the
timer response-timeout
timer retry
Use the
timer retry
timer wait
Use the
timer wait
timers
Use the
timers
garbage-collection.
tracert
Use the
tracert
traffic-limit
Use the
traffic-limit
traffic-limit
Use the
traffic-limit
kbps.
traffic-priority
Use the
traffic-priority
traffic-priority
Use the
traffic-priority
traffic-redirect
Use the
traffic-redirect
is permit).
traffic-share-across-interface
Use the
traffic-share-across-interface
averagely distribute the traffic to the RIP interfaces of the router through equal-cost routes.
traffic-statistic
Use the
traffic-statistic
is permit).
udp-helper enable
Use the
udp-helper enable
udp-helper port
Use the
udp-helper port
udp-helper server
Use the
udp-helper server
undelete
Use the
undelete
command to set the waiting time before the primary server resumes the active state.
command to set the real-time accounting interval.
command to set the TACACS server response timeout time.
command to configure a connection request retry interval.
command to set the timeout time for detect operations.
command to modify the values of the three RIP timers: period update, timeout, and
command to check the reachability of network connection and troubleshoot the network.
command, to activate the ACL and perform traffic limitation.
command to add traffic policing action in the QoS profile, with the granularity of 64
command to activate an ACL and perform priority marking.
command to enable traffic priority marking for traffic that matches the ACL.
command to activate the ACL to recognize and redirect the traffic (whose action
command to enable traffic sharing across RIP interfaces to
command to activate the ACL to recognize and count the traffic (whose action
command to enable the UDP Helper function.
command to configure the UDP port with relay function.
command to configure the relay destination server.
command to recover the deleted file.
3Com Switch 5500 Family
Quick Reference Guide
HWTACACS view
HWTACACS view
HWTACACS view
MSDP view
Detecting Group view
RIP view
Any view
Ethernet Port view
QoS Profile view
Ethernet Port view
QoS Profile view
Ethernet Port view
RIP view
System view
System view
System view
VLAN Interface view
User view

Advertisement

loading

This manual is also suitable for:

5500-ei5500-ei pwr