Download Print this page

3Com 5500-SI Quick Reference Manual page 28

5500 series
Hide thumbs Also See for 5500-SI:

Advertisement

ftp { cluster | remote-server } source-interface
Use the
ftp { cluster | remote-server } source-interface
interface to establish a connection with an FTP server.
ftp { cluster | remote-server } source-ip
Use the
ftp { cluster | remote-server } source-ip
to establish a connection with an FTP server.
ftp dir
Use the
dir
ftp disconnect
Use the
ftp disconnect
end.
ftp-server
Use the
ftp-server
members.
ftp server enable
Use the
ftp server enable
ftp-server source-interface
Use the
ftp-server source-interface
ftp-server source-ip
Use the
ftp-server source-ip
ftp source-interface
Use the
ftp source-interface
ftp source-ip
Use the
ftp source-ip
ftp timeout
Use the
ftp timeout
garp timer
Use the
garp timer
garp timer leaveall
Use the
garp timer leaveall
gateway-list
Use the
gateway-list
of a DHCP address pool.
get
Use the
get
gratuitous-arp learning enable
Use the
gratuitous-arp-learning enable
function.
gvrp
Use the
gvrp
command to query a specified file.
command to terminate the FTP connection of a specified user at the FTP server
command to configure a public FTP server on the management device for cluster
command to enable FTP server and allow FTP users to log in.
command to specify source interface for the FTP server.
command to specify source IP address for the FTP server.
command to specify source interface for the FTP client.
command to specify source IP address for the FTP client.
command to configure connection timeout interval.
command to set the GARP Hold, Join or Leaver timer of the port to a specified value.
command to set the GARP LeaveAll timer to a specified value.
command to configure one or multiple gateway IP addresses for the DHCP clients
command to download a remote file and save the file to the local device.
command to enable GVRP globally (in system view) or on a port (in Ethernet port view).
command to use a specified source
command to use a specified source IP address
command to enable the gratuitous ARP packet learning
3Com Switch 5500 Family
Quick Reference Guide
User view
User view
FTP Client view
System view
Cluster view
System view
System view
System view
System view
System view
System view
Ethernet Port view
System view
DHCP Address Pool view
FTP Client Command view
System view
System view
Ethernet Port view

Advertisement

loading

This manual is also suitable for:

5500-ei5500-ei pwr