3Com 5500-SI Quick Reference Manual page 29

3Com Switch 5500 Family
Quick Reference Guide
gvrp registration
Use the
gvrp registration
header
Use the
header
help
Use the
help
history-command max-size
Use the command
you want the Switch to save.
holdtime
Use the
holdtime
host-route
Use the
host-route
hwtacacs nas-ip
Use the
hwtacacs nas-ip
hwtacacs scheme
Use the
hwtacacs scheme
a new HWTACACS scheme will be created.
icmp
Use the
icmp
idle-cut
Use the
idle-cut
idle-timeout
Use the
idle-timeout
remain idle before it is disconnected.
if-match { acl | ip-prefix }
Use the
if-match { acl | ip-prefix }
Route-policy.
if-match cost
Use the
if-match cost
the routing information.
if-match interface
Use the
if-match interface
if-match ip next-hop
Use the
if-match ip next-hop
hop address of the routing information.
if-match tag
Use the
if-match tag
igmp enable
Use the
igmp enable
command to configure the GVRP registration type on a port.
command to configure the system to display a header during user log in.
command to get the help information about the specified or all SFTP client commands.
history-command max-size
command to configure the valid holdtime of a switch.
command to configure RIP to accept host routes. This is the default.
command to specify the source address of the hwtacacs packet sent from NAS.
command to enter the HWTACACS view. If you specified a nonexistent scheme,
command to specify the Internet Control Message Protocol (ICMP) parameters.
command to configure the user template in the current ISP domain.
command to configure the amount of time you want to allow a user interface to
command to configure the IP address range to match the
command to configure one of the match rules of route-policy to match the cost of
command to match the route whose next hop is the designated interface.
command to configure one of the match rules of route-policy on the next
command to match the tag field of OSPF route information.
command to enable IGMP on an interface.
to specify the amount of previously entered commands that
29
Ethernet Port view
System view
SFTP Client view
User Interface view
Cluster view
RIP view
System view
System view
Any view
ISP Domain view
User Interface view
Route Policy view
Route Policy view
Route Policy view
Route Policy view
Route Policy view
VLAN Interface view