3Com 5500-SI Quick Reference Manual page 23

3Com Switch 5500 Family
Quick Reference Guide
display ssh-server source-ip
Use the
display ssh-server source-ip
no source IP address is specified, 0.0.0.0 is displayed.
display ssh user-information
Use the
display ssh user-information
including user name, authentication mode, key name and authorized service types. If the username is
specified, the command displays information about the specified user.
display ssh2 source-ip
Use the
display ssh2 source-ip
source IP address is specified, 0.0.0.0 is displayed.
display startup
Use the
display startup
switch or all switches in the fabric, including the names of the currently used, the to-be-used main and
backup startup configuration files.
display stop-accounting buffer
Use the
display stop-accounting-buffer
buffered in the switch.
display stp
Use the
display stp
analyze and maintain the topology of a network and to make MSTP operate properly.
display stp ignored-vlan
Use the
display stp ignored-vlan
display stp region-configuration
Use the
display stp region-configuration
effective, including the region name, region revision level, and spanning tree instance-to-VLAN mappings
configured for the switch.
display stp tc
Use the
display stp tc
notifications that an active port has received.
display tcp statistics
Use the
display tcp statistics
display tcp status
Use the
display tcp status
display telnet-server source-ip
Use the
display telnet-server source-ip
server. If no source IP address is specified, 0.0.0.0 is displayed.
display tftp source-ip
Use the
display tftp source-ip
source IP address is specified, 0.0.0.0 is displayed.
display this
Use the
display this
display time-range
Use the
display time-range
will see the active or inactive state outputs respectively.
command to display the source IP address of the SSH server. If
command to display information about the current SSH users,
command to display the source IP address of the SSH2 client. If no
command to display the information about the startup configuration files on one
command to view information on the stop-accounting requests
command to display the status and statistics of specified spanning trees, and hereby
command to view the list of STP-Ignored VLANs.
command to display the MST region configurations that are
command to display the number of topology changes and/or topology change
command to view the statistics information about TCP packets.
command to view the TCP connection state.
command to display the source IP address of the Telnet
command to display the source IP address of the TFTP client. If no
command to display the running configurations in the current view of the system.
command to view the configuration and status of the current time range. You
23
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view