3Com 5500-SI Quick Reference Manual page 6

clock datetime
Use the
clock datetime
clock summer-time
Use the
clock summer-time
clock timezone
Use the
clock timezone
close
Use the
close
view so that you terminate the control connection and data connection with the remote FTP server at the
same time.
cluster
Use the
cluster
cluster enable
Use the
cluster enable
cluster-mac
Use the
cluster-mac
command only on the management device.
cluster-mac syn-interval
Use the
cluster-mac syn-interval
multicast packets. This command can be executed on the management device only.
cluster switch-to
Use the
cluster switch-to
for configuration and management.
command-privilege level
Use the
command-privilege level
within a selected view.
copy
Use the
copy
copy configuration
Use the
copy configuration
consistent configuration.
count
Use the
count
crp-policy
Use the
crp-policy
C-RP, prevent C-RP spoofing.
cut connection
Use the
cut connection
data-flow-format
Use the
data-flow-format
databits
Use the
databits
command to set the current system time and date.
command to set the name, time range and offset of the daylight saving time.
command to set local time zone information.
command to disconnect FTP client side from FTP server side without exiting FTP client side
command to enter cluster view.
command to enable the cluster function on a switch.
command to configure a multicast MAC address for cluster management. Run this
command to set the interval for the management device to send
command to switch between the management device and member devices
command to configure the priority level assigned to any command
command to copy a file.
command to copy the configuration of a specific port to other ports, to ensure
command to configure the packet sending times in each test.
command to limit the range of legal C-RP, as well as target service group range of each
command to disconnect a user or a category of users by force.
command to configure the unit of data flow sent to TACACS Server.
command to configure the data bits for the AUX (Console) port to either 7 or 8.
3Com Switch 5500 Family
Quick Reference Guide
User view
User view
User view
FTP Client view
System view
System view
Cluster view
Cluster view
User view
System view
User view
System view
Remote-Ping Test Group view
PIM view
System view
HWTACACS view
User Interface view