3Com 5500-SI Quick Reference Manual page 27

3Com Switch 5500 Family
Quick Reference Guide
file prompt
Use the
file prompt
filter-policy export
Use the
filter-policy export
information advertised by a certain type of routing protocols.
filter-policy export
Use the
filter-policy export
filter-policy export
Using the
information.
filter-policy import
Use the
filter-policy import
filter-policy import
Use the
filter-policy
filter-policy import
Using the
received.
fixdisk
Use the
fixdisk
flow-control
Use the
flow-control
software or none.
flow-control
Use the
flow-control
packets due to congestion.
format
Use the
format
non-recoverable. Specially, configuration files will be lost after formatting flash memory.
free user-interface
Use the
free user-interface
interface will be disconnected after the reset.
free web-users
Use the
free web-users
frequency
Use the
frequency
ftm stacking-vlan
Use the
ftm stacking-vlan
ftp
Use the
ftp
ftp cluster
Use the
ftp cluster
also leads you to FTP client view.
command to modify the prompt mode of file operations on the Switch.
command to configure to set the filtering conditions of the routing
command to configure RIP to filter the advertised routing information.
command, you can configure how OSPF filters the advertised routing
filter-policy export
command to set the condition for filtering the routing information.
import command to configure the switch to filter global routing information.
command, you can configure how OSPF filters the routing information
filter-policy import
command to recover lost chains in a storage device.
command to configure the flow control mode on the AUX (Console) port to hardware,
command to enable flow control on an Ethernet port. This avoids discarding data
command to format the storage device. All of the files on the storage device will be lost and
command to reset a specified user interface to its default settings. The user
command to disconnect a specified Web user or all Web users by force.
command to configure the automatic test interval.
command to specify the stacking VLAN of the Switch.
command to establish a control connection with a remote FTP server and enter FTP client view.
command to establish a control connection with a cluster FTP server. This command
27
System view
Routing Protocol view
RIP view
OSPF view
Routing Protocol view
RIP view
OSPF view
Any view
User Interface view
Ethernet Port view
User view
User view
User view
Remote-Ping Test Group view
System view
User view
User view