Download Print this page

3Com 5500-SI Quick Reference Manual page 3

5500 series
Hide thumbs Also See for 5500-SI:

Advertisement

3Com Switch 5500 Family
Quick Reference Guide
acl
Use the
acl
acl
Use the
acl
active region-configuration
Use the
active region-configuration
tree) region.
add-member
Use the
add-member
address-check
Use the
address-check
start the validity check on user addresses under the VLAN interface.
administrator-address
Use the
administrator-address
member device.
am enable
Use the
am enable
am ip-pool
Use the
am ip-pool
packets in this IP address pool whose IP addresses are the source IP addresses to pass the port for layer
3 forwarding.
am trap enable
Use the
am trap enable
am user-bind
Use the
am user-bind
port.
apply cost
Use the
apply cost
apply poe-profile
Use the
apply poe-profile
Ethernet port.
apply qos-profile
Use the
apply qos-profile
apply qos-profile interface
Use the
apply qos-profile interface
apply tag
Use the
apply tag
area
Use the
area
command to reference ACL and implement the ACL control to the TELNET users.
command to define an ACL identified by a number, and enter the corresponding ACL View.
command to activate the settings of an MST (multiple spanning
command to add a candidate device to a cluster.
command to enable or disable DHCP relay security on a VLAN interface, so as to
command to store the MAC address of the management device on a
command to enable address management IP address pool.
command to set an address management IP address pool for a port, permitting the
command to enable the access management trap function.
command to bind the MAC address and IP address of a legal user to the specified
command to configure the route cost value of route information.
command to apply the existing PoE Profile configuration to the specified
command to apply the QoS profile to the current port.
command to apply a QoS profile to one or more consecutive ports.
command to configure to set the tag area of OSPF route information.
command to enter an OSPF area view.
3
User Interface view
System view
MST Region view
Cluster view
VLAN Interface view
Cluster view
System view
Ethernet Port view
System view
System view
Ethernet Port view
Route Policy view
System view
Ethernet Port view
System view
Route Policy view
OSPF view

Advertisement

loading
Need help?

Need help?

Do you have a question about the 5500-SI and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

5500-ei5500-ei pwr