3Com 5500-SI Quick Reference Manual page 20

display poe power
Use the
display poe interface power
or all ports on the Switch.
display poe power supply
Use the
display poe powersupply
(PSE).
display poe-profile
Use the
display poe-profile
Profile for a switch.
display port
Use the
display port hybrid
command to view the ports whose link type is trunk.
trunk
display port-security
Use the
display port-security
(including global configuration and all or specific port configuration).
display port vlan-vpn
Use the
display port vlan-vpn
current system, including current IPID value, VLAN-VPN ports, VLAN-VPN uplink ports and whether the
inner tag priority replication function is enabled.
display power
Use the
display power
display protocol-priority
Use the
display protocol-priority
display protocol-vlan interface
Use the
display protocol-vlan interface
indexes configured for specified ports.
display protocol-vlan vlan
Use the
display protocol-vlan vlan
configured for specified VLANs.
display qos cos-local-precedence-map
Use the
display qos cos-local-precedence-map
display qos-interface all
Use the
display qos-interface all
display qos-interface line-rate
Use the
display qos-interface line-rate
output.
display qos-interface mirrored-to
Use the
display qos-interface mirrored-to
display qos-interface traffic-limit
Use the
display qos-interface traffic-limit
display qos-interface traffic-priority
Use the
display qos-interface traffic-priority
command, you can view the power information of a specific port
command to view the parameters of the power sourcing equipment
command to display detailed configuration information of the created PoE
command to view the ports whose link type is hybrid. Use the
command to display the information about port security configuration
command to display the information about VLAN VPN configuration of the
command to display the working state of the built-in power supply.
command to display the priority of protocol packets.
command to display the protocol information and protocol
command to display the protocol information and protocol indexes
command to view COS and Local-precedence map
command to display all the QoS settings of the port.
command to view the traffic rate limitations of the interface
command to view the settings of the traffic mirror.
command to view the traffic limit settings.
command to view the traffic priority settings.
3Com Switch 5500 Family
Quick Reference Guide
Any view
Any view
Any view
display port
Any view
Any view
Any view
Any view
Any view
Any view'
Any view
Any view
Any view
Any view
Any view
Any view
Any view