Download Print this page

3Com 5500-SI Quick Reference Manual page 43

5500 series
Hide thumbs Also See for 5500-SI:

Advertisement

3Com Switch 5500 Family
Quick Reference Guide
qos cos-local-precedence-map
Use the
qos cos-local-precedence-map
qos-profile
Use the
qos-profile
profile, you can directly enter the corresponding view.
radius nas-ip
Use the
radius nas-ip
radius-scheme
Use the
radius-scheme
radius scheme
Use the
radius scheme
reboot
Use the
reboot
reboot member
Use the
reboot member
region-name
Use the
region-name
register-policy
Use the
register-policy
PIM-SM network and to accept the specified messages only.
remote-ping
Use the
remote-ping
remote-ping-agent enable
Use the
remote-ping-agent enable
remote-probe vlan
Use the
remote-probe vlan enable
a switch.
remotehelp
Use the
remotehelp
remove
Use the
remove
This command has the same function as the
rename
Use the
rename
reset
Use the
reset
reset acl counter
Use the
reset acl counters
reset arp
Use the
reset arp
command to configure "CoS Local-precedence" mapping table
command to create a QoS profile and enter the corresponding view. For an existing
command to specify the source address of the RADIUS packet sent from NAS.
command to configure the RADIUS scheme used by the current ISP domain.
command to configure a RADIUS scheme group and enter its view.
command to restart an Ethernet switch.
command to reset a specified member device on the management device.
command to assign an MST region name to a switch.
command to configure a RP to filter the register messages sent by the DR in the
command to specify remote-ping test class.
command to enable remote-ping client.
command to enable the remote-probe port mirroring on the VLAN of
command to display help information about the FTP protocol command.
command to delete the specified file from the server.
command to change the name of the specified file on the SFTP server.
command to reset the system configuration parameters of RIP.
command to reset the ACL statistics information to zero.
command to remove information that is no longer required from the ARP mapping table.
command.
delete
43
System view
System view
System view
ISP Domain view
System view
User view
Cluster view
MST Region view
PIM view
System view
System view
VLAN view
FTP Client view
SFTP Client view
SFTP Client view
RIP view
User view
User view

Advertisement

loading

This manual is also suitable for:

5500-ei5500-ei pwr