Renewing Ip Address From Dhcp - Cisco DPA 7630 Administration Manual

Chapter 5 Getting Started with the DPA 7630/7610
Step 3
Step 4

Renewing IP Address from DHCP

Step 1
Step 2
Step 3
78-11069-03
Choose Use DHCP.
Press Enter to toggle between yes (use DHCP) and no (do not use DHCP).
If you use DHCP, you can only modify the host name; you cannot modify the
other network settings. See
details.
If you do not use DHCP, you must enter the additional network settings. See these
sections for details:
Setting the Host Name, page 5-4
•
• Setting the IP Address, page 5-8
Setting the Subnet Mask, page 5-8
•
Setting the Default Router, page 5-9
•
Assigning the DNS Server, page 5-9
•
Setting the Domain Name, page 5-10
•
Identifying the Time Source for Event Logs, page 5-10
•
You might need to renew the IP address automatically assigned to the
DPA 7630/7610. For example, if you have changed the physical location of the
DPA 7630/7610 from one subnet to another or if you need assistance
troubleshooting a connectivity problem.
To renew an IP address assigned from DHCP, follow these steps:
From the main menu, choose Configure.
Choose Network interface.
Choose Renew DHCP.
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
"Setting the Host Name" section on page 5-4
Configuring Network Settings
for
5-7