Resolving Generic Mwi Errors - Cisco DPA 7630 Administration Manual

Chapter 7 Troubleshooting the DPA 7630/7610
Table 7-8 Cisco CallManager Errors and Warnings Explanation (continued)
Error
CM register reject
<port number>: Port
using cached TFTP
response

Resolving Generic MWI Errors

Table 7-9 Generic MWI Errors and Warnings Explanation
Error
MWI queue full
78-11069-03
Explanation
The port attempted to
register with
Cisco CallManager but was
rejected.
The port is using a cached
TFTP response to access the
Cisco CallManager server.
Table 7-9 describes errors and warnings that might appear on the DPA 7630/7610
either on-screen or in the event log, which are caused by a misconfiguration or
miscommunication with setting and receiving MWI signals on the Definity or
Meridian 1 PBX systems. Use this information to resolve these errors.
Explanation
The PBX MWI queue for
this port is full.
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
Resolving Error and Warning Messages
Action
Verify that Cisco CallManager and the
settings for this port in Cisco CallManager are
properly configured.
Refer to "Configuring Cisco CallManager"
section on page 4-2 for details and online help
included with Cisco CallManager for
additional assistance.
The Cisco CallManager server is currently
not reachable. Verify that it is up-and-running
and that the network connection to it from the
DPA 7630/7610 is operational.
If you do not want to use cached TFTP
responses, see the "Using Cached TFTP
Responses to Access Cisco CallManager"
section on page 6-12
Action
Verify the connection to the PBX system, and
verify that the PBX is up and running properly.
for details.
7-23