Adding The Dpa 7630/7610 To Cisco Callmanager; Using Auto-Registration - Cisco DPA 7630 Administration Manual

Chapter 4 Preparing the Cisco CallManager and Octel Systems

Adding the DPA 7630/7610 to Cisco CallManager

Using Auto-Registration

78-11069-03
The DPA 7630/7610 connects to Cisco CallManager to provide the following
capabilities:
Access from the Cisco IP Phones to the Octel voice messaging systems.
•
The DPA 7630/7610 provides connection to the Octel voice messaging
system by emulating IP phones. These emulated phones appear in the
Cisco CallManager database.
• Proper signaling to the message waiting indicators (MWIs) on the
Cisco IP Phones.
Some ports on the DPA 7630/7610 handle MWI commands from the Octel
system. An additional "virtual" IP phone sends these messages to the
Cisco CallManager system. Cisco CallManager then sets the MWI on the
Cisco IP Phones.
When reviewing the following tasks, if you need additional instructions, refer to
the Cisco CallManager Administration Guide or the online help in the
Cisco CallManager application:
Adding the DPA 7630/7610 to Cisco CallManager, page 4-3
•
• Setting Up the Voice Mail Hunt Group, page 4-5
• Configuring the DPA Ports and Phones, page 4-10
Configuring the Message Waiting Light, page 4-13
•
When the DPA 7630/7610 and Cisco CallManager connect, the ports on the
DPA 7630/7610 appear as IP phones in the Cisco CallManager database. An
additional "virtual" port also appears as an IP phone to Cisco CallManager, but it
does not have any correspondence to a physical port. It is created by the
DPA 7630/7610 to handle MWI commands to Cisco CallManager.
You can choose to have the DPA 7630/7610 automatically added to
Cisco CallManager using auto-registration. To do this, you must verify that
auto-registration is enabled in Cisco CallManager. Refer to the documentation or
online help included with the Cisco CallManager application for details.
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
Configuring Cisco CallManager
4-3